Walk-around pilothouse cabin
Closed cabin with uninterrupted exterior perimeter circulation. Full protection from the weather with full access to the entire deck, thanks to two side access points.
All models
32 Cabin
All the comfort of a cabin. All the freedom of a walkaround.
Length
9.71 m
Beam
3.32 m
Maximum power
2 × 300 hp
Capacity
12 passengers + 2 crew · CE target
Design
Enjoy the sea, regardless of the weather.
The 32 Cabin brings the comfort of a closed cabin to a boat under ten meters without sacrificing life on deck. Every element has been designed to maintain a continuous connection between the helm, the social area, and the outdoors, allowing you to enjoy the sea for more months of the year.
Folding rear window
The stern glass opens and connects the cabin with the exterior cockpit. A single continuous space when the weather is good; a closed refuge when it is not.
Integrated awning
A retractable bimini hidden in the hardtop provides shade when needed and disappears completely when not. No additional structures. No compromise on aesthetics.
Overhead light and insulated storage
A skylight bathes the cabin in natural light, while two extra-long insulated drawers resolve on-deck storage. Clarity on the inside, cold preserved on the outside.
A platform ready to evolve. Electronics, air conditioning, fishing equipment, galley, refrigeration, lighting and dozens of options let each 32 Cabin be configured to match how its owner likes to navigate.
THE CABIN
Much more than a cabin.
An enclosed cabin doesn't just provide comfort. It changes how the boat is used. It allows you to extend the season, expand your sailing range, and stay on board with the peace of mind of being prepared for any condition.
- Convertible cabin for overnight stays
- Integrated head
- Interior galley
- Air conditioning / heating
Designed to make the most of every metre of a 9.71 m platform.
Every dimension has been carefully considered to deliver space, comfort and performance. The specifications below summarise the core characteristics of the Mareva 32 Cabin.
ISO 8666 / CE B
- Maximum length (Lmax)
- 9.71 m / 31.86 ft
- Maximum beam (Bh)
- 3.32 m / 10.89 ft
- Draught (LC)
- 0.50 m / 1.64 ft
- Fuel capacity
- 2 × 400 L / 211 gal
- Fresh water
- 200 L / 53 gal
- Black water
- 100 L / 26 gal
- Passengers / crew
- 12 passengers + 2 crew · CE target
- CE category
- B (Offshore)
Preliminary specifications subject to change during development and certification.
Construction and personalisation
Built in composite, finished to measure.
The Mareva 32 Cabin hull is built by infusion, with controlled laminates and reinforcement where the sea truly demands it. On that structural base, each unit is configured with the owner before production starts.
Build process
- 01
Infusion lamination
Fibre and structural cores vacuum-infused for an even laminate with no excess resin.
- 02
High-density cores
Local reinforcement in load areas: engine beds, hardware and hull-deck joints.
- 03
Hull-deck joint
Continuous structural bonding, with no weak points or leaks along the perimeter.
- 04
Dimensional control
Every hull is checked against the digital model before moving to finishing.
Personalisation
80+equipment options
- Deck
- Sun deck, convertible dining, awning and stowage
- Comfort
- Climate control, audio, lighting and upholstery
- Navigation
- Electronics, sensors and anchoring control
- Finishes
- Synthetic teak, lacquer, textiles and hull colour
The final configuration is agreed with the owner before production begins.
Interested in the 32 Cabin?
Leave us your details and we'll get back with model-specific information, timelines, sales sheet and reservation terms.
Modelo / 32PH
GDPR / No spam / Only real project updates
INTEREST LIST
We only write when there is something real to tell.
Next model
Mareva 32 Charter / Open Deck