Multifunction leaning post
The helm station integrates a concealable fresh water sink, electric fridge and gas grill. A complete service island, resolved in the heart of the deck.
All models
32 Open
Open deck taken to a new level of comfort.
Length
9.71 m
Beam
3.32 m
Maximum power
2 × 300 hp
Capacity
12 passengers + 2 crew · CE target
Design
A deck built to be lived on.
Personalisation is part of the design. More than eighty equipment options allow each 32 Open to be tailored to its owner's needs, from comfort and entertainment to fishing or long-distance cruising.
Convertible bow dining area
From a dining area for eight people to a spacious sun deck in seconds. One space, different ways to enjoy it.
Integrated awning
A retractable bimini hidden in the hardtop provides shade when needed and disappears completely when not. No additional structures. No compromise on aesthetics.
Pull-out refrigerator
The refrigerator slides outwards to become an additional seat or a practical service point during anchoring.
Below deck
Beyond the deck.
The 32 Open's architecture takes advantage of a volume that most boats in its category simply don't have. The result is a double bed with natural light and an integrated, discreet head, without sacrificing an open, clean deck designed for moving with freedom.
- Double bed with 195 × 145 cm mattress
- Integrated and discreet head
- Large stowage space
- Optional air conditioning / heating
Progettato per valorizzare ogni metro di una piattaforma di 9,71 m.
Ogni dimensione è stata studiata per offrire spazio, comfort e prestazioni. Le specifiche seguenti riassumono le caratteristiche principali del Mareva 32 Open.
ISO 8666 / CE B
- Lunghezza massima (Lmax)
- 9,71 m / 31.86 ft
- Larghezza massima (Bh)
- 3,32 m / 10.89 ft
- Pescaggio (LC)
- 0,50 m / 1.64 ft
- Capacità carburante
- 2 × 400 L / 211 gal
- Acqua dolce
- 200 L / 53 gal
- Acque nere
- 100 L / 26 gal
- Passeggeri / equipaggio
- 12 passeggeri + 2 membri dell'equipaggio · obiettivo CE
- Categoria CE
- B (navigazione d'altura)
Specifiche preliminari soggette a modifiche durante lo sviluppo e il processo di certificazione.
Construction and personalisation
Built in composite, finished to measure.
The Mareva 32 Open hull is built by infusion, with controlled laminates and reinforcement where the sea truly demands it. On that structural base, each unit is configured with the owner before production starts.
Build process
- 01
Infusion lamination
Fibre and structural cores vacuum-infused for an even laminate with no excess resin.
- 02
High-density cores
Local reinforcement in load areas: engine beds, hardware and hull-deck joints.
- 03
Hull-deck joint
Continuous structural bonding, with no weak points or leaks along the perimeter.
- 04
Dimensional control
Every hull is checked against the digital model before moving to finishing.
Personalisation
80+equipment options
- Deck
- Sun deck, convertible dining, awning and stowage
- Comfort
- Climate control, audio, lighting and upholstery
- Navigation
- Electronics, sensors and anchoring control
- Finishes
- Synthetic teak, lacquer, textiles and hull colour
The final configuration is agreed with the owner before production begins.
Interested in the 32 Open?
Leave us your details and we'll get back with model-specific information, timelines, sales sheet and reservation terms.
Modelo / 32CC
GDPR / Niente spam / Solo aggiornamenti concreti sul progetto
LISTA DI INTERESSE
Ti scriveremo solo quando avremo novità concrete da comunicare.
Next model
Mareva 32 Cabin / Pilothouse